Hi,
This patchset brings up USB Host ports and Ethernet port on
the OMAP5 uEVM board.
It also does some cleanup with respect to DT clock binding
for the mfd/omap-usb-host driver.
Please queue these for -next.
Lee,
I've folded some platform data dependent patches with mfd patches
so that they don't break functionality when applied individually.
You can safely pull in all MFD patches (1 to 6).
Tony & Benoit,
Can you please accept patches 7, 8 and 9?
Thanks.
Tested on:
- OMAP5 uEVM
- Pandaboard ES Rev. B1
- Beagleboard-XM Rev C2 (DT + Legacy)
- Beagleboard Rev C4 (DT + Legacy)
Changelog:
v9:
- Folded dependent platform data patches into MFD patches.
v8:
- Addressed review comments and split patch
"mfd: omap-usb-host: Get clocks based on hardware revision"
- Removed unnecessary usb host dummy clocks on OMAP3
- Removed unnecessary clock alias "ehci_logic_fck" for OMAP3
- Rebased on 3.14-rc3
v7:
- Rebased on 3.14-rc2
- Removed incompatible ids from DT files and examples
v6:
- Initialized clocks to -ENODEV and split patch 3.
v5:
- Expose all clocks in the DT binding document for mfd:omap-usb-host
and mfd:omap-usb-tll
v4:
- Updated DT binding document for clock binding
v3:
- Rebased on top of 3.13-rc7
cheers,
-roger
---
Roger Quadros (9):
mfd: omap-usb-host: Get clocks based on hardware revision
mfd: omap-usb-host: Always fail on clk_get() error
mfd: omap-usb-host: Use proper clock name instead of alias
mfd: omap-usb-host: Use clock names as per function for reference
clocks
mfd: omap-usb-host: Update DT clock binding information
mfd: omap-usb-tll: Update DT clock binding information
ARM: OMAP2+: Remove legacy_init_ehci_clk()
ARM: dts: OMAP2+: Get rid of incompatible ids for USB host nodes
usb: omap: dts: Update DT binding example usage
.../devicetree/bindings/mfd/omap-usb-host.txt | 23 ++++
.../devicetree/bindings/mfd/omap-usb-tll.txt | 10 ++
.../devicetree/bindings/usb/ehci-omap.txt | 2 +-
.../devicetree/bindings/usb/ohci-omap3.txt | 2 +-
arch/arm/boot/dts/omap3.dtsi | 4 +-
arch/arm/boot/dts/omap4-panda-common.dtsi | 8 +-
arch/arm/boot/dts/omap4.dtsi | 10 +-
arch/arm/boot/dts/omap5-uevm.dts | 8 +-
arch/arm/boot/dts/omap5.dtsi | 10 +-
arch/arm/mach-omap2/cclock3xxx_data.c | 4 -
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 6 --
arch/arm/mach-omap2/pdata-quirks.c | 16 ---
drivers/clk/ti/clk-3xxx.c | 4 -
drivers/mfd/omap-usb-host.c | 116 ++++++++++++++-------
14 files changed, 135 insertions(+), 88 deletions(-)
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This patchset brings up USB Host ports and Ethernet port on
the OMAP5 uEVM board.
It also does some cleanup with respect to DT clock binding
for the mfd/omap-usb-host driver.
Please queue these for -next.
Lee,
I've folded some platform data dependent patches with mfd patches
so that they don't break functionality when applied individually.
You can safely pull in all MFD patches (1 to 6).
Tony & Benoit,
Can you please accept patches 7, 8 and 9?
Thanks.
Tested on:
- OMAP5 uEVM
- Pandaboard ES Rev. B1
- Beagleboard-XM Rev C2 (DT + Legacy)
- Beagleboard Rev C4 (DT + Legacy)
Changelog:
v9:
- Folded dependent platform data patches into MFD patches.
v8:
- Addressed review comments and split patch
"mfd: omap-usb-host: Get clocks based on hardware revision"
- Removed unnecessary usb host dummy clocks on OMAP3
- Removed unnecessary clock alias "ehci_logic_fck" for OMAP3
- Rebased on 3.14-rc3
v7:
- Rebased on 3.14-rc2
- Removed incompatible ids from DT files and examples
v6:
- Initialized clocks to -ENODEV and split patch 3.
v5:
- Expose all clocks in the DT binding document for mfd:omap-usb-host
and mfd:omap-usb-tll
v4:
- Updated DT binding document for clock binding
v3:
- Rebased on top of 3.13-rc7
cheers,
-roger
---
Roger Quadros (9):
mfd: omap-usb-host: Get clocks based on hardware revision
mfd: omap-usb-host: Always fail on clk_get() error
mfd: omap-usb-host: Use proper clock name instead of alias
mfd: omap-usb-host: Use clock names as per function for reference
clocks
mfd: omap-usb-host: Update DT clock binding information
mfd: omap-usb-tll: Update DT clock binding information
ARM: OMAP2+: Remove legacy_init_ehci_clk()
ARM: dts: OMAP2+: Get rid of incompatible ids for USB host nodes
usb: omap: dts: Update DT binding example usage
.../devicetree/bindings/mfd/omap-usb-host.txt | 23 ++++
.../devicetree/bindings/mfd/omap-usb-tll.txt | 10 ++
.../devicetree/bindings/usb/ehci-omap.txt | 2 +-
.../devicetree/bindings/usb/ohci-omap3.txt | 2 +-
arch/arm/boot/dts/omap3.dtsi | 4 +-
arch/arm/boot/dts/omap4-panda-common.dtsi | 8 +-
arch/arm/boot/dts/omap4.dtsi | 10 +-
arch/arm/boot/dts/omap5-uevm.dts | 8 +-
arch/arm/boot/dts/omap5.dtsi | 10 +-
arch/arm/mach-omap2/cclock3xxx_data.c | 4 -
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 6 --
arch/arm/mach-omap2/pdata-quirks.c | 16 ---
drivers/clk/ti/clk-3xxx.c | 4 -
drivers/mfd/omap-usb-host.c | 116 ++++++++++++++-------
14 files changed, 135 insertions(+), 88 deletions(-)
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/